Avenue Chlorinated Rubber line marking paint 10 Litres
Avenue "Highway" Chlorinated Rubber line marking paint. Select colour yellow, black or white.
A line marking paint for use on roads, car parks and most ground and floor surfaces.
Solvent based high build marking paint based on a modified chlorinated rubber hybrid incorporated with durable pigments and extenders. It is fast drying with good adhesion and is ideal for fast turn round street lining and road marking applications.
Can be applied to most surfaces including existing coatings without major preparatory steps, providing maximum film build with minimum coats in repair and maintenance programmes.
Colour White, Yellow, Black
Finish Slight Sheen
Curing Agent n/a
Mix Ratio n/a
Specific Gravity 1.511
Volume Solids 48%
Recommended Film Thickness 72.5-96μm WFT / 150-200μm DFT
Theoretical Spreading Rate 5-6.6 m2/litre
Application Method Airless Spray
Flash Point 4°C
VOC 450 g/litre
Drying Times @ 20ºC
Touch Dry 20 minutes
Hard Dry 1 hour
Recoatable at 1 hour
Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
Previous coatings can be over-coated and patch primed.
Edges should be tightly adhering and well feathered to accept the overlapping coating.
Certificate No. LRQ4002648
Mixing Mix well before use.
Thinners Thinner No.4
Airless Spray Use tip 0.30-0.42 mm, 65-80° and minimum 2,500 psi pressure.A single coat
application is usually possible to achieve required film build.
Cleaner Thinner No.4
Cleanup Considerations All equipment should be cleaned immediately after use with Thinner No.4
It is advisable that equipment should be cleaned/flushed during the course of application, the frequency of which will depend on the volume of material used and timescale over which applied.
Ensure all waste materials (including packaging) are disposed of in accordance with local regulations.
Please call for further details and datasheets. Tel 01753 684084.